92-99 EP82/EP91 GT86 Electronic Accelerator Pedal Mount V2 - Toyota Starlet DBW
92-99 EP82/EP91 GT86 Electronic Accelerator Pedal Mount V2 - Toyota Starlet DBW
9 available to pre-order
Couldn't load pickup availability
EP Wiring Technical Information
NEW BATCH PRE-ORDER! We have launched our latest pre-order as of 29th June 2026. We expect these to ship around Sept 2026 (estimated - subject to change)
V2 is around 30g lighter and has a slightly improved design with the same great pedal placement.
Our Toyota GT86 / Subaru BRZ electronic throttle/accelerator pedal mount to your RHD EP91 or 1992-1995 EP82 Starlet for Drive by Wire conversion!
Compatible Accelerator Pedal Part Numbers
-
Subaru: 36010CA050
(other part numbers from side of pedal: 198800-9020, 05P31D00008) - Subaru: 36010CA091*
*Unconfirmed by us but according to Amayama, this superseeds 36010CA050
Photo of the actual pedal used for development of this part, other part numbers may also be compatible
If you're looking to convert your right hand drive EP91 or 1992-1995 EP82 Starlet to Drive by Wire, then this bolt in solution will solve one of the big headaches for the conversion. This was a difficult part to figure out and took many prototypes to get the placement right without the connector fouling at the top and allowing the full pedal travel which is around 20mm longer than stock.
- Manufactured in the UK - CNC machined from billet 6082 T6 aluminium and anodised black.
- Bolts into the stock location using the stock bolts.
- For RHD EP91 or 1992-1995 EP82 Starlets which come with OEM cable pedal's with the part numbers: Toyota 78120-10080 or 78120-10060. This has not been tested with left hand drive cars but is very unlikely to fit!
- V2 comes with stainless steel nuts and bolts to attach the GT86/BRZ pedal to the mount.
- Pedal connector kits for GT86/BRZ pedal are available here
- Wiring looms available here
- Off road use only
We also have a Drive by Wire throttle body adapter for the 4E-FTE intake manifold available for purchase.
