Toyota Engine Coolant Temp Connector 90980-10737 90980-11062

Toyota Engine Coolant Temp Connector 90980-10737 90980-11062 - Genuine TE 2 way connector suitable for Toyota Starlet EP82/EP91 (up to 1997.04) ECU engine coolant temperature sensor. (Most likely used on other Toyotas of a similar age) - (Keying D)

• Wire size: 0.3 - 0.85 mm² | 22-18 AWG (Terminal Part Number: 184095-2 or 171699-1)
• Insulation/Seal size: 1.2-1.7 mm (Wire Seal Part Number: TE 184139-1)
• Crimp tool recommendation:
  • Rennsteig 624 1730 3 01 RT Die Set

Pigtail version

Pigtail version comes with 500mm of 0.5mm² PVC wire crimped to the terminals ready to install. We advise the pigtail wires are connected using good quality uninsulated crimp splices covered with glue lined heat shrink if possible. A splice demonstration video is available here.
While we would not advise soldering, this is also possible but please ensure a ridged glue lined heatshrink (like TE SCL) is used and the soldered joint is supported from vibration and is as far away from heat as possible.