{"title":"Featured Products","description":"","products":[{"product_id":"dbw-bosch-throttle-body-e-throttle-wiring-sub-harness","title":"Bosch DBW Throttle Body (E-Throttle) Wiring Loom \/ Harness 1.2m","description":"\u003cp\u003eDBW Throttle Body (e-throttle) Wiring Sub Harness to connect your ECU to your Bosch  44mm \/ 54mm \/ 60mm \/ 68mm \/ 74mm \/ 82mm Electronic Throttle Body.\u003c\/p\u003e\n\u003cp\u003eECU pins and DTM socket terminals (5V+ and Sensor Ground) on one end and the DBW Throttle Body connector on the other.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTE Spec 44 20 AWG wire rated to 150 degrees C - Motorsport grade wire, dual layer insulation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCovered with TechFlex Insultherm\u003c\/li\u003e\n\u003cli\u003eSuperseal 1.0 terminals crimped with Mecal\/TE Press and Mecal Applicator (£6000+ factory equipment)\u003c\/li\u003e\n\u003cli\u003eThrottle Body terminals crimped with production quality Rennsteig PEW 12 frame and \u003ca href=\"https:\/\/www.digikey.co.uk\/en\/products\/detail\/rennsteig-tools-inc\/624-1693-3-012-RT\/10451775\"\u003edie set\u003c\/a\u003e (£430+ tool)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou will need to connect to sensor supply (5V+) and sensor ground wires. These will be terminated to DTM\/DT pins\/sockets with a 2 way Amphenol ATM pigtail connector kit will be supplied. Put a note in the order comments or contact me for requirements\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eECU pins available -\n\u003cul\u003e\n\u003cli\u003eSuperseal 1.0 (Link, Haltech, Motec, Emtron, Syvecs, DTA, ECU Master PRO)\u003c\/li\u003e\n\u003cli\u003eSICMA 1.5 terminals (ECUMaster EMU BLACK)\u003c\/li\u003e\n\u003cli\u003eNone - Unterminated wire - leave an order note with instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarness length of 1.2m\u003c\/strong\u003e. Custom lengths available on request. Perfectly suited for RHD EP82\/EP91 Starlet's with ECU mounted in standard location.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ep-wiring.com\/product\/dbw-throttle-body-adapter-for-4e-fte-intake\/\"\u003eStarlet Owners - Check out\u003c\/a\u003e\u003ca href=\"https:\/\/ep-wiring.com\/product\/dbw-throttle-body-adapter-for-4e-fte-intake\/\"\u003e our 4E-FTE Drive By Wire Adapter here\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"TechFlex Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc)","offer_id":50130088624470,"sku":"EPW-DBW-TB-HARN-TF","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Braid \/ ECUMaster Black","offer_id":50316462686550,"sku":null,"price":80.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Braid \/ None - Unterminated wire","offer_id":50316282364246,"sku":null,"price":80.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc)","offer_id":50130088591702,"sku":"EPW-DBW-TB-HARN-DR25","price":92.0,"currency_code":"GBP","in_stock":false},{"title":"DR-25 Heat Shrink \/ ECUMaster Black","offer_id":50316462653782,"sku":null,"price":92.0,"currency_code":"GBP","in_stock":false},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire","offer_id":50316282298710,"sku":null,"price":92.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/dbw-bosch-throttle-body-e-throttle-wiring-sub-harness-ep-wiring.jpg?v=1745882220"},{"product_id":"dbw-gt86-brz-accelerator-pedal-wiring-sub-harness","title":"DBW GT86 \/ BRZ Accelerator Pedal Wiring Sub Harness","description":"\u003cp\u003eGT86 \/ BRZ Pedal Wiring Sub Harness to connect your ECU to your GT86\/BRZ E-Throttle pedal. ECU pins on one side and the GT86\/BRZ pedal connector on the other.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTE Spec 44 20 AWG wire rated to 150 degrees C - Motorsport grade wire, dual layer insulation\u003c\/li\u003e\n\u003cli\u003eCovered with TechFlex Insultherm or DR-25 heat shrink\u003c\/li\u003e\n\u003cli\u003eSuperseal 1.0 terminals crimped with Mecal\/TE Press and Mecal Applicator (£6000+ factory equipment)\u003c\/li\u003e\n\u003cli\u003eSumitomo TS 025 terminals crimped with production quality Rennsteig PEW 12 frame and \u003ca href=\"https:\/\/www.digikey.co.uk\/en\/products\/detail\/rennsteig-tools-inc\/624-1693-3-012-RT\/10451775\"\u003edie set\u003c\/a\u003e (£430+ tool)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor supply (5V+) and sensor ground wires will be terminated to a 2-Way DTM\/ATM socket plug. Put a note in the order comments or contact me for CUSTOM requirements\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eECU pins available - Superseal 1.0 (Link, Haltech, Motec, Emtron, Syvecs, DTA, ECU Master PRO) \/ None - Unterminated wire - leave an order note with instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire length of 1.6m\u003c\/strong\u003e - suitable for most road cars which have ECU behind glovebox. This includes EP91\/EP82 Starlets ECU mounted in standard location. Custom lengths available on request just ask when you order.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-92-95-ep82-gt86-electronic-accelerator-pedal-mount\/\"\u003eStarlet owners - Check out our EP91\/92-95 EP82 GT86\/BRZ Pedal mount here\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc)","offer_id":50130093539670,"sku":"EPW-GT86-APA-HARN","price":92.0,"currency_code":"GBP","in_stock":false},{"title":"DR-25 Heat Shrink \/ DTM Terminals","offer_id":50316173345110,"sku":null,"price":92.0,"currency_code":"GBP","in_stock":false},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire","offer_id":50316173377878,"sku":null,"price":92.0,"currency_code":"GBP","in_stock":false},{"title":"TechFlex Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc)","offer_id":50130093572438,"sku":"EPW-GT86-APA-HARN","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Braid \/ DTM Terminals","offer_id":50316173410646,"sku":null,"price":80.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Braid \/ None - Unterminated wire","offer_id":50316173443414,"sku":null,"price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/dbw-gt86-brz-accelerator-pedal-wiring-sub-harness-ep-wiring.jpg?v=1745882286"},{"product_id":"toyota-starlet-ep91-wiring-loom-link-g4x-monsoon-with-dbw","title":"Toyota Starlet EP91 Wiring Loom - Link G4X Monsoon with DBW!","description":"\u003cp\u003eLooking to install a Link MonsoonX ECU with DBW in your 1996-1999 EP91 Toyota Starlet but unsure about wiring? Our solution: an off-the-shelf plug-in wiring harness!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM \/ UK \/ Irish \/ Aus - RHD only\u003c\/strong\u003e - other models still possible but are a custom order so get in touch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's a plug-in wiring harness?\u003c\/h3\u003e\n\u003cp\u003eUnlike a patch harness, a plug-in wiring harness is a complete replacement for the engine wiring, see the diagram below for the 98\/99 Glanza V, highlighted in green. This harness seamlessly connects to the engine bay fusebox and interior body connectors (2\/3, depending on your year\/country\/engine). Most factory functions are retained; details on what stays and what doesn't are further explained below. The harness doesn't include a new battery cable, so you'll need to strip this from your existing wiring (check out the video at the bottom of this page for a guide). \u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-803 size-medium\" src=\"https:\/\/ep-wiring.com\/wp-content\/uploads\/2024\/03\/Screenshot-2024-03-14-at-22.00.32-300x211.png\" alt=\"\" width=\"300\" height=\"211\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIs your build ever evolving? This wiring harness allows easy changes to injectors, coils, and additional features as required.\u003c\/h3\u003e\n\u003cp\u003eThis harness uses sub harnesses with Deutsch\/Amphenol DTM\/ATM plugs for injectors, coils and additional features so you can change what you need to when you need to. We also supply the pinouts for these connectors so any competent wiring DIYer can make the changes themselves!\u003c\/p\u003e\n\u003ch3\u003eI don't see any options for fuel\/oil pressure sensors or other features, can these be added?\u003c\/h3\u003e\n\u003cp\u003eYes! We include 2 breakout connectors for this purpose, one in the engine bay and another in the interior. Because everyone's build is different, we decided the best approach would be a modular harness. This means everyone has the same main harness, which keeps costs low, and people can then choose to have whatever extra features they would like. To order custom additions, please get in touch!\u003c\/p\u003e\n\u003ch3\u003eHave questions?\u003c\/h3\u003e\n\u003cp\u003eCall us on \u003ca href=\"tel:+441475325091\"\u003e+44 1475 325 091\u003c\/a\u003e or message us via the \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003econtact page\u003c\/a\u003e, \u003ca href=\"https:\/\/www.instagram.com\/ep_wiring\/\"\u003eInstagram\u003c\/a\u003e or \u003ca href=\"https:\/\/www.facebook.com\/epwiring\"\u003eFacebook.\u003c\/a\u003e We're here to help!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes wiring for \u003ca href=\"https:\/\/ep-wiring.com\/product\/canchecked-mce18-can-bus-extension\/\"\u003e\u003cstrong\u003eCANChecked MCE18\u003c\/strong\u003e \u003c\/a\u003efor extra inputs\/outputs! (CANChecked MCE18 device not included)\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eEP91 - JDM 4E-FE\/FTE or RHD UK\/Irish\/Aus\u003c\/strong\u003e models\u003c\/li\u003e\n\u003cli\u003eManufactured using Tefzel (ETFE) wire - rated up to 150ºC (OEM is rated to 80ºC)\u003c\/li\u003e\n\u003cli\u003eLoom is covered using high temperature fibreglass braid- rated over 600ºC\u003c\/li\u003e\n\u003cli\u003eInjectors and Coils are on sub harasses so these can be changed in the future! Sub harnesses are available to order by contacting us or listed on the website around June 2024\u003c\/li\u003e\n\u003cli\u003eChoice of stock injector, EV14\/USCAR or Bosch EV1 connectors.\u003c\/li\u003e\n\u003cli\u003eChoice of stock coil, K20 COP (coil on plug) or 2ZZ\/Yaris COP.\u003c\/li\u003e\n\u003cli\u003eThe harness is modular so you can customise the additional inputs and outputs! Common options are fuel or oil pressure, flex fuel sensor, clutch switch etc... Customisations will be available to order on the website by June 2024 in the meantime \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch with your requirements for a quote and to order\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in house using production line tooling by Komax, Mecal, Rennsteig, Knipex, DMC, TE, RaceSpec, Ideal and Sargent. For ultimate reliability no cheap generic tools will be used in the construction of your wiring harness, Toyota didn't so neither will we!\u003c\/li\u003e\n\u003cli\u003eQuality control including crimp height measurement and point to point pin testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specs and Connectors\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Link G4X Monsoon\u003c\/li\u003e\n\u003cli\u003eTriggering - Stock \u003cstrong\u003e4E-FTE\u003c\/strong\u003e cam sensor (Crank Trigger can be added on as a custom change - please contact us)\u003c\/li\u003e\n\u003cli\u003eIntake Air Temp Sensor - Bosch 2 wire sensor connector - Sensor not included\u003c\/li\u003e\n\u003cli\u003eCoolant Sensor (ECT) - Bosch 2 wire or OEM Toyota 3 wire - Sensor not included\u003c\/li\u003e\n\u003cli\u003eDrive by Wire - We sell both \u003ca href=\"https:\/\/ep-wiring.com\/product\/v2-92-99-ep82-ep91-gt86-electronic-accelerator-pedal-mount\/\"\u003epedal mounts\u003c\/a\u003e and \u003ca href=\"https:\/\/ep-wiring.com\/product\/dbw-throttle-body-adapter-for-4e-fte-intake\/\"\u003eintake adapters\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eInjectors - Choice of Stock Toyota (aka Denso style), Bosch EV14\/USCAR (ID 1050X, EV14 etc) or Bosch EV1 (Junior Power Timer)\u003c\/li\u003e\n\u003cli\u003eCoils - Choice of Factory 4E-FTE, K20 Coil on Plug or 2ZZ\/Yaris Coil on Plug - Coil packs not included\u003c\/li\u003e\n\u003cli\u003eGround Ring Terminals for Coils, AUX, CAN and ECU\u003c\/li\u003e\n\u003cli\u003eKnock Sensor Wiring for Bosch 0261231006 - Sensor not included\u003c\/li\u003e\n\u003cli\u003eBoost Solenoid (MAC solenoid) - \u003ca href=\"https:\/\/ep-wiring.com\/product\/mac-boost-solenoid\/\"\u003eSolenoid not included - can be ordered from here!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEngine Bay AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and spare Av\/Digital inputs\/outputs)\u003c\/li\u003e\n\u003cli\u003eCabin AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and spare Av\/Digital inputs\/outputs)\u003c\/li\u003e\n\u003cli\u003eCAN Plug next to ECU wired to suit LinkECU products such as CAN Lambda, \u003ca href=\"https:\/\/ep-wiring.com\/product-category\/link-ecu\/accessories\/driver-displays\/\"\u003eGauges or Dashes\u003c\/a\u003e etc - Pins can be rearranged DIY to suit Haltech\/others.\u003c\/li\u003e\n\u003cli\u003eOEM Check Engine Light\u003c\/li\u003e\n\u003cli\u003eOEM Tacho signal for stock gauge cluster - Tacho modification by soldering a 1kohm resistor in gauge cluster (\u003ca href=\"https:\/\/www.youtube.com\/watch?v=tOHkLjdutHI\u0026amp;ab_channel=EPWiring\"\u003eCheck our our DIY video\u003c\/a\u003e) or by wiring in something like a \u003ca href=\"https:\/\/www.haltech.com\/product\/ht-038006-tacho-output-adaptor\/\"\u003eHaltech Tacho Output Adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOil pressure light by OEM switch - If using oil pressure sensor on AUX plug you can wire the ECU to the Oil pressure light - ask for this in the order comments\u003c\/li\u003e\n\u003cli\u003eOEM Boost Switch\u003c\/li\u003e\n\u003cli\u003eAlternator 3 plug wiring\u003c\/li\u003e\n\u003cli\u003eOEM fan switch - 98-99 cars only\u003c\/li\u003e\n\u003cli\u003eBrake fluid level connector\u003c\/li\u003e\n\u003cli\u003eFuel Pump relay trigger from ECU output\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor Signal from Stock Gauge Cluster - If you are using a digital dash this will not work\u003c\/li\u003e\n\u003cli\u003eWindscreen wiper wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot included but required for fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink ECU E-Throttle Module\u003c\/strong\u003e - \u003ca href=\"https:\/\/ep-wiring.com\/product\/link-e-throttle-module-dbw\/\"\u003eview it here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCANChecked MCE18\u003c\/strong\u003e - \u003ca href=\"https:\/\/ep-wiring.com\/product\/canchecked-mce18-can-bus-extension\/\"\u003eview it here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eToyota GT86 \/ Subaru BRZ E-Throttle pedal\u003c\/b\u003e - \u003ca href=\"https:\/\/ep-wiring.com\/product\/v2-92-99-ep82-ep91-gt86-electronic-accelerator-pedal-mount\/\"\u003eFull details and mount can be purchased here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBosch Electronic Throttle Body\u003c\/strong\u003e - \u003ca href=\"https:\/\/ep-wiring.com\/product\/dbw-throttle-body-adapter-for-4e-fte-intake\/\"\u003eFull details and adapter can be found here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eECU mount - To make your life easier we \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-ecu-mounting-plate\/\"\u003emade ECU mounting plates\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOEM parts not used:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eABS - Some or all parts of ABS may no longer work. If required it is additional cost\u003c\/li\u003e\n\u003cli\u003eAC Vac solenoids - AC may still work, ask to confirm\u003c\/li\u003e\n\u003cli\u003eStock idle valve\u003c\/li\u003e\n\u003cli\u003eDiagnostics port\u003c\/li\u003e\n\u003cli\u003eBattery power and ground cables - Original ones must be stripped from original wiring or \u003ca href=\"https:\/\/ep-wiring.com\/product\/starlet-glanza-v-1996-1997-alternator-power-wiring\/\"\u003e1996-1997 cars can purchase our replacement wiring here\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"Stock (OEM\/Denso) \/ Stock 4E-FTE Coil","offer_id":50130108023126,"sku":"EPW-EP91-MONX-DBW","price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ K20 Coil on Plug","offer_id":50305620246870,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305620279638,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ R35 Skyline Coil on Plug","offer_id":50305620312406,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Other \/ Decide later","offer_id":50305620377942,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Stock 4E-FTE Coil","offer_id":50305620410710,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ K20 Coil on Plug","offer_id":50305620443478,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305620476246,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ R35 Skyline Coil on Plug","offer_id":50305620509014,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Other \/ Decide later","offer_id":50305620574550,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Stock 4E-FTE Coil","offer_id":50305620607318,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ K20 Coil on Plug","offer_id":50305620640086,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305620672854,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ R35 Skyline Coil on Plug","offer_id":50305620705622,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Other \/ Decide later","offer_id":50305620771158,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Stock 4E-FTE Coil","offer_id":50305620803926,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ K20 Coil on Plug","offer_id":50305620836694,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305620869462,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ R35 Skyline Coil on Plug","offer_id":50305620902230,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Other \/ Decide later","offer_id":50305620967766,"sku":null,"price":1059.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/toyota-starlet-ep91-wiring-loom-link-g4x-monsoon-with-dbw-ep-wiring.jpg?v=1745882300"},{"product_id":"canchecked-mfd15-gen-2-obd-2-52mm-multi-gauge","title":"CANchecked MFD15 GEN 2 OBD 2 - 52mm Multi Gauge","description":"\n\u003ch1\u003eCANchecked OBD2 MFD15 GEN 2 Multi-Gauge\u003c\/h1\u003e\n\u003ch2\u003e52mm \/ 2.0\" gauge displays OBD 2 values and up to 6 sensors simultaneously\u003c\/h2\u003e\n\u003ch3\u003eOLED multigauge for ECU OBD2 or as Standalone for up to 6 external sensors\u003c\/h3\u003e\n\u003cp align=\"justify\"\u003e\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe brand new second Generation (GEN 2) CANchecked displays offer:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWLAN Connect\u003c\/b\u003e via smartphone allows configuration of display\/widgets\/sensors\u003c\/li\u003e\n\u003cli\u003eTwo side buttons directly on the display - no need to lay the cable and drill for the rotary knob\u003c\/li\u003e\n\u003cli\u003eSwipe instead of touch tip\u003c\/li\u003e\n\u003cli\u003eImproved grafics with better anti aliasing\u003c\/li\u003e\n\u003cli\u003eThe widgets are more precisely adjustable\u003c\/li\u003e\n\u003cli\u003eNew warning pop-up functions\u003c\/li\u003e\n\u003cli\u003e6 analog inputs instead of 4\u003c\/li\u003e\n\u003cli\u003eOptional logging via smartphone\u003c\/li\u003e\n\u003cli\u003eFreely definable Can Bus protocol (TRI files as with MFD28\/32)\u003c\/li\u003e\n\u003cli\u003eCan Bus Switching \/ Analog forwarding for certain control units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat is CANchecked? CANchecked displays, gauges, software and sensors enable the visual representation of important engine data, such as oil temperature, boost pressure, lambda, exhaust temperature etc.. This can be done either via Can Bus (depending on the ECU values) or via additional analog sensors.\u003c\/p\u003e\n\u003cp\u003eThe MFD 15 GEN 2 provides access to all data from the engine control unit. The sensors are queried by the CAN bus using the manufacturer-specific protocol. We have optimized the protocol to achieve maximum query speed. The affordable display instrument for OBD 2 ECUs is equipped with an easy-to-read OLED screen, which offers best readability even in direct sunlight. Thanks to the 52mm diameter, it is compatible with many existing options. The MFD15 display comes together with a vehicle-specific bezel and thus fits into the interior like an original part. The ventilation remains intact through the slots. Operation is now by means of two newly fitted push buttons; a rotary knob is also available as an option. The retrofit display is suitable for all ECUs that output OBD 2 via Can-Bus or UDS. The display can also be fed with 6 values from external analog sensors. This also makes it possible to use it as a stand-alone multifunction display.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5\" inch OLED display with standard 52mm round instrument dimensions (like VDO displays)\u003c\/li\u003e\n\u003cli\u003eSuper slim design - only 12.5mm deep\u003c\/li\u003e\n\u003cli\u003ePerfect integration into the vehicle interior thanks to adapter ring for dashboard ventilation panel\u003c\/li\u003e\n\u003cli\u003eUp to 8 different display windows freely configurable via WLAN Connect and smartphone (CANchecked DSS display software and laptop still possible)\u003c\/li\u003e\n\u003cli\u003eECU values can be displayed (connection via OBD 2 socket (cable included)\u003c\/li\u003e\n\u003cli\u003eUp to 64 sensors can be queried, query of sensors like manufacturer diagnostic tools\u003c\/li\u003e\n\u003cli\u003e6 analog inputs for 0-5V sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature (with adapter), boost pressure, ethanol sensor with surcharge licence)\u003c\/li\u003e\n\u003cli\u003eUp to 6 sensors\/values can be shown simultaneously in one window on the display\u003c\/li\u003e\n\u003cli\u003eLED shift light\/warning light integrated, LED shift light optional (CC2400)\u003c\/li\u003e\n\u003cli\u003eIndividual minimum, maximum and pop-up function when warning values are exceeded or fallen short of\u003c\/li\u003e\n\u003cli\u003ePop-up function when exceeding or falling below values\u003c\/li\u003e\n\u003cli\u003eCan be operated via OBD2, UDS and analog sensors\u003c\/li\u003e\n\u003cli\u003eOnline log function\u003c\/li\u003e\n\u003cli\u003ePerformance Meter (measures e.g. the time from 100-200 km\/h)\u003c\/li\u003e\n\u003cli\u003eAdjustable screen brightness (dims automatically with vehicle displays)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eViews:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 pages of free configuration\u003c\/li\u003e\n\u003cli\u003eUp to 6 widgets per page\u003c\/li\u003e\n\u003cli\u003eVarious widgets (digital number, bar, speed, single pointer, log, tableswitch, picture (from SD card), number, circle display)\u003c\/li\u003e\n\u003cli\u003eWidgets can be moved and resized by drag'n'drop\u003c\/li\u003e\n\u003cli\u003eDepending on the widgets, colour adjustment is possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSupported ECUs\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll ECUs that have Can Bus, OBD 2 output via CAN Bus and partially UDS. The MFD15 is compatible with ISO 11898-2 and SAE J2284. A total of up to 64 sensors can be queried if the manufacturer supports this. Data available in broadcast as well as OBD2 queries via Can Bus (11bit\/29bit) are implemented. Furthermore special protocols like UDS are available. If the desired ECU is not listed, please contact us. Included by default:\n\u003cul\u003e\n\u003cli\u003eOBD2 – 11bit\/29bit\u003c\/li\u003e\n\u003cli\u003eEcumaster Classic und Black\u003c\/li\u003e\n\u003cli\u003eDTAfast\u003c\/li\u003e\n\u003cli\u003eBMW E46 Can Bus\u003c\/li\u003e\n\u003cli\u003eBMW E90 Can Bus\u003c\/li\u003e\n\u003cli\u003eHaltech v2\u003c\/li\u003e\n\u003cli\u003eHondata\u003c\/li\u003e\n\u003cli\u003eKMS van Kronenburg\u003c\/li\u003e\n\u003cli\u003eLinkECU\u003c\/li\u003e\n\u003cli\u003eMaxxECU\u003c\/li\u003e\n\u003cli\u003eMotec M1\u003c\/li\u003e\n\u003cli\u003eEmtron\u003c\/li\u003e\n\u003cli\u003eMegasquirt 2 and 3\u003c\/li\u003e\n\u003cli\u003eSyvecs\u003c\/li\u003e\n\u003cli\u003eTrijekt\u003c\/li\u003e\n\u003cli\u003eVW\/AUDI PQ34\/PQ35 u.ä.\u003c\/li\u003e\n\u003cli\u003eAudi S1 (CJX)\u003c\/li\u003e\n\u003cli\u003eAudi RS3\/TT-RS (DAZA, DNWA\/B\/C)\u003c\/li\u003e\n\u003cli\u003eVW UP GTI (DKRA\/B\/C\/D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAccess to all data from the ECU:*\u003c\/b\u003e\u003cbr\u003e\nBy default, we deliver pre-installed TRI files with the displays. All sensors that are queried are defined in TRI files.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTemperatures:\u003c\/b\u003e Exhaust gas temperature, engine water temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressures:\u003c\/b\u003e Boost pressure, ambient pressure, fuel pressure, pre-feed pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLambda \/ mixture:\u003c\/b\u003e Lambda value, injection time, short-term lambda adjustment, longterm lambda adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDriver dynamics:\u003c\/b\u003e brake pressure, vehicle speed, throttle angle\/gas pedal position\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOther:\u003c\/b\u003e engine speed, total ignition angle, gear, battery voltage, ignition angle reset per cylinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnalog inputs:\u003c\/b\u003e additional sensors can be added here: Oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc but also an ethanol sensor (Flex Fuel) and many more*\u003c\/li\u003e\n\u003cp\u003e*It always varies from vehicle to vehicle, depending on what the engine ECU unit(s) outputs.\u003c\/p\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePerformance Monitor\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure your acceleration times in our performance widget - 0-100, 100-200, 0-200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eData Logging\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy access to the log on demand and storage via online logging function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePlug \u0026amp; Play Installation\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCANchecked displays with vehicle-specific adapter rings are precision-manufactured and fit perfectly into your vehicle's interior without interfering with the functionality of your vehicle's ventilation system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eExpandable Functionality\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 analog inputs allow monitoring of sensors and devices from other manufacturers. Future licenses under development will allow integration of e.g. ethanol fuel systems. Any sensors can be connected via the six analog inputs - CANchecked supports linear 0-5V as well as NTC sensors. Our offered sensors are mostly stored in the TRI files and only need to be connected.\n\u003cul\u003e\n\u003cli\u003eCC22902 Temperature sensor for fluids\u003c\/li\u003e\n\u003cli\u003eCC22901 Pressure sensor M10x1 0-10 Bar (145psi)\u003c\/li\u003e\n\u003cli\u003eCC22900 Pressure sensor 0-5,5bar (80psi)\u003c\/li\u003e\n\u003cli\u003eGeneric Type-K converter 0-1250°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCustomizable Screens\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! A total of eight display pages can be customised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eYour Data, The Way You Want It!\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCANchecked can display up to eight pages and has access to up to 64 sensors on your vehicle. Use the side buttons or the optional rotary knob to navigate between pages. Need more customization options? You can personalize your views on the MFD15 by customizing the graphics, sensors, and widgets with WLAN Connect functionality and your smartphone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the box:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCANchecked MFD15 GEN 2 display\u003c\/li\u003e\n\u003cli\u003eQuickstart Guide\u003c\/li\u003e\n\u003cli\u003ePlug B (6 pin)\u003c\/li\u003e\n\u003cli\u003ePlug C (12 pin)\u003c\/li\u003e\n\u003cli\u003e20cm pre-crimped connection cables for power supply, Can Bus, analog inputs, 5V and sensor ground\u003c\/li\u003e\n\u003cli\u003ePins to crimp yourself\u003c\/li\u003e\n\u003cli\u003eTwo 1K resistors (for pullup for NTC sensors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCANchecked optional accessories:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShift knob (The knob already known from the MFD15 Gen1 is now only optional. It can be used if it is difficult to reach the front buttons of the display or if you prefer to operate it. The connection is plug and play directly to the connector B on the back of the display. With its 50cm long cable it can be flexibly placed in the vehicle).\u003c\/li\u003e\n\u003cli\u003eA wide range of sensors, such as oil and water temperature, boost pressure, oil and fuel pressure, etc.\u003c\/li\u003e\n\u003cli\u003eOther vehicle-specific integrations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eIf available, installation instructions are stored on the TurboZentrum or CANchecked website.\u003c\/b\u003e\u003cbr\u003e\nThe temperature range of the display is -10°C to 70°C.\u003cbr\u003e\n12V is required as power supply, 5V is optionally possible.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eWill the Display heat up in the air vent?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo. The Displays are always protected against heat that’s flowing through the air vents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWill the Air Vent still work with the display installed?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes it does. We’re always creating air vent solutions that still allow airflow passing by the display through special tunnels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCan I change the appearance of the display, the units and scales?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes! With the different widget packs and the option to upload custom graphics you can completely individualize your display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCan I use analog inputs?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYes there are 6 analog inputs with the option to extend to more with our analog connectors. So you can read Pressures, Temperatures, Ethanol content, etc. We can also create complete packages for what you need!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWhat ECU Data can CANchecked Access?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy default, we deliver a prefabricated TRI file with your display. All sensors that are queried are defined here, f.e.:\u003cbr\u003e\n- Temperatures: Exhaust gas temperature, engine water temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG temperature\u003cbr\u003e\n- Pressures: Boost pressure, ambient pressure, fuel pressure, pre-feed pump\u003cbr\u003e\n- Lambda \/ mixture: Lambda value, injection time, short-term lambda adjustment, longterm lambda adjustment\u003cbr\u003e\n- Miscellaneous: Speed, air mass (g\/s), vehicle speed, throttle valve angle, total ignition angle, ignition angle reduction per cylinder, N75 pulse rate in%, terminal 30 voltage, oil level, torque, gear...\u003cbr\u003e\n- If values are missing, they can easily be added.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCan I change the look of the boost gauge graphics to match my car?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou can use the CANchecked Display Setup Software to upload your own graphics. They need to be in the following format:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e- Image Type: 24bit BMP file (R8 G8 B8)\u003cbr\u003e\n- Sizes: Background: 320 pixels X 240 pixels, Boost gauge: 240 pixels X 240 pixels, Tachometer: 160 pixels X 160 pixels\u003c\/p\u003e","brand":"CANChecked","offers":[{"title":"Default Title","offer_id":50130108318038,"sku":"CC01002","price":259.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/canchecked-mfd15-gen-2-obd-2-52mm-multi-gauge-canchecked.jpg?v=1745882308"},{"product_id":"toyota-starlet-glanza-v-plug-in-wiring-loom-harness-4e-5e-haltech-nexus-s2-elite-1500","title":"Toyota Starlet Glanza V Plug-in Wiring Loom (Harness) - 4E\/5E - Haltech Nexus S2 \/ Elite 1500","description":"\u003cp\u003eLooking to install a Haltech Nexus S2 or Elite 1500 ECU in your 1996-1999 EP91 Toyota Starlet EP91 but unsure about wiring? Our solution: our Starlet Haltech plug-in wiring harness!\u003c\/p\u003e\n\u003ch3\u003eWhat's a plug-in wiring harness?\u003c\/h3\u003e\n\u003cp\u003eUnlike a patch harness, a plug-in wiring harness is a complete replacement for the engine wiring, see the diagram below for the 98\/99 Glanza V, highlighted in green. This harness seamlessly connects to the engine bay fusebox and interior body connectors (1\/2\/3, depending on your year\/country\/engine). Most factory functions are retained; details on what stays and what doesn't are further explained below. The harness doesn't include a new battery cable, so you'll need to strip this from your existing wiring (check out the video at the bottom of this page for a guide). However, we're considering offering this in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/OPTIMIZE_BACKUP_PRODUCT_Screenshot_2026-02-08_211700.png?v=1771155022\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIs your build ever evolving? This wiring harness allows easy changes to injectors, coils, and additional features as required.\u003c\/h3\u003e\n\u003cp\u003eThis harness uses sub harnesses with Deutsch\/Amphenol DTM\/ATM plugs for injectors, coils and additional features so you can change what you need to when you need to. We also supply the pinouts for these connectors so any competent wiring DIYer can make the changes themselves!\u003c\/p\u003e\n\u003ch3\u003eI don't see any options for fuel\/oil pressure sensors or other features, can these be added?\u003c\/h3\u003e\n\u003cp\u003eYes! We include 2 breakout connectors for this purpose, one in the engine bay and another in the interior. Because everyone's build is different, we decided the best approach would be a modular harness. This means everyone has the same main harness, which keeps costs low, and people can then choose to have whatever extra features they would like. To order custom additions, please get in touch!\u003c\/p\u003e\n\u003ch3\u003eHave questions?\u003c\/h3\u003e\n\u003cp\u003eCall us on \u003ca href=\"tel:+441475325091\"\u003e+44 1475 325 091\u003c\/a\u003e or message us via the live chat, \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003econtact page\u003c\/a\u003e, \u003ca href=\"https:\/\/www.instagram.com\/ep_wiring\/\"\u003eInstagram\u003c\/a\u003e or \u003ca href=\"https:\/\/www.facebook.com\/epwiring\"\u003eFacebook.\u003c\/a\u003e We're here to help!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eRight hand drive (RHD) EP91\u003c\/strong\u003e models - If you have a different model then please \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch for a quote!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufactured using Tefzel (ETFE) wire - rated up to 150ºC (OEM is rated to 80ºC)\u003c\/li\u003e\n\u003cli\u003eLoom is covered using high temperature fibreglass braid- rated over 600ºC\u003c\/li\u003e\n\u003cli\u003eInjectors and Coils are on sub harasses so these can be changed in the future! Sub harnesses are available to order by contacting us or listed on the website around June 2024\u003c\/li\u003e\n\u003cli\u003eChoice of stock injector, EV14\/USCAR or Bosch EV1 connectors.\u003c\/li\u003e\n\u003cli\u003eChoice of stock coil, K20 COP (coil on plug) or 2ZZ\/Yaris COP.\u003c\/li\u003e\n\u003cli\u003eChoice of Drive by Wire (DBW) or cable throttle.\u003c\/li\u003e\n\u003cli\u003eFree TPS Sensor mount with non-drive by wire versions!\u003c\/li\u003e\n\u003cli\u003eThe harness is modular so you can customise the additional inputs and outputs! Common options are fuel or oil pressure, flex fuel sensor, clutch switch etc... For customisations \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch with your requirements for a quote and to order\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in house using production line tooling by Komax, Mecal, Rennsteig, Knipex, DMC, TE, RaceSpec, Ideal and Sargent. For ultimate reliability no cheap generic tools will be used in the construction of your wiring harness, Toyota didn't so neither will we!\u003c\/li\u003e\n\u003cli\u003eQuality control including crimp height measurement and point to point pin testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specs and Connectors\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Haltech Elite 1500 or Nexus S2 ECU's (please \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch\u003c\/a\u003e if you have a different ECU for a custom order)\u003c\/li\u003e\n\u003cli\u003eTriggering - Stock \u003cstrong\u003e4E-FTE\u003c\/strong\u003e cam\/distributor sensor (Crank Trigger can be added on as a custom change - please contact us)\u003c\/li\u003e\n\u003cli\u003eIntake Air Temp Sensor - Bosch 2 wire sensor connector - Sensor not included\u003c\/li\u003e\n\u003cli\u003eCoolant Sensor (ECT) - Bosch 2 wire or OEM Toyota 3 wire - Sensor not included\u003c\/li\u003e\n\u003cli\u003eOptional Drive By Wire for Bosch 54mm Throttle body (other sizes available, let us know as the pinout changes)\u003c\/li\u003e\n\u003cli\u003eOptional Electronic Accelerator Pedal wiring on DBW versions - GT86\/BRZ pedal connector\u003c\/li\u003e\n\u003cli\u003eCable Throttle versions - Throttle Position (TPS) - \u003cstrong\u003eEP Wiring Bosch TPS mount kit included!\u003c\/strong\u003e - Bosch 0 280 122 001 (0280122001) variable throttle position sensor not included\u003c\/li\u003e\n\u003cli\u003eInjectors - Choice of Stock Toyota (aka Denso style), Bosch EV14\/USCAR (ID 1050X, EV14 etc) or Bosch EV1 (Junior Power Timer)\u003c\/li\u003e\n\u003cli\u003eCoils - Choice of Factory 4E-FTE Coil and Ignitor, K20 Coil on Plug or 2ZZ\/Yaris Coil on Plug - Custom coils available just ask! - Coil packs not included\u003c\/li\u003e\n\u003cli\u003eGround Ring Terminals for Coils, AUX, CAN and ECU\u003c\/li\u003e\n\u003cli\u003eKnock Sensor Wiring for Bosch 0261231006 - Sensor not included\u003c\/li\u003e\n\u003cli\u003eBoost Control Solenoid wiring wired in as factory (MAC solenoid) - \u003ca href=\"https:\/\/ep-wiring.com\/product\/mac-boost-solenoid\/\"\u003eSolenoid not included - direct plugin option can be ordered from here!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEngine Bay AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and spare inputs\/outputs)\u003c\/li\u003e\n\u003cli\u003eCabin AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and spare inputs\/outputs)\u003c\/li\u003e\n\u003cli\u003eCAN Plug next to ECU wired to suit Haltech products such as WB1 Lambda - Pins can be rearranged DIY to suit LinkECU\/other devices.\u003c\/li\u003e\n\u003cli\u003eOEM Check Engine Light\u003c\/li\u003e\n\u003cli\u003eTacho Adapter plug for stock gauge cluster - Just plugin a \u003ca href=\"https:\/\/www.haltech.com\/product\/ht-038006-tacho-output-adaptor\/\"\u003eHaltech Tacho Output Adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOil pressure light by OEM switch - If using oil pressure sensor on AUX plug you can wire the ECU to the Oil pressure light - ask for this in the order comments\u003c\/li\u003e\n\u003cli\u003eOEM Boost Switch\u003c\/li\u003e\n\u003cli\u003eAlternator wiring\u003c\/li\u003e\n\u003cli\u003eOEM fan switch - 98-99 cars only\u003c\/li\u003e\n\u003cli\u003eBrake fluid level connector\u003c\/li\u003e\n\u003cli\u003eFuel Pump relay trigger from ECU output\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor Signal from Stock Gauge Cluster - If you are using a digital dash this will not work\u003c\/li\u003e\n\u003cli\u003eWindscreen wiper wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot included but required for fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eECU mount - To make your life easier we \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-ecu-mounting-plate\/\"\u003emade ECU mounting plates\u003c\/a\u003e and they are \u003cstrong\u003eFREE\u003c\/strong\u003e with every \u003cstrong\u003eHaltech Elite 1500 or Nexus S2 ECU purchase - UK ONLY\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDBW versions require throttle body mount and pedal mount - \u003ca href=\"https:\/\/ep-wiring.com\/product-category\/drive-by-wire\/\"\u003eWe sell these here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDBW versions require Electronic Throttle Body - \u003ca href=\"https:\/\/ep-wiring.com\/product\/dbw-throttle-body-adapter-for-4e-fte-intake\/\"\u003emore info here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDBW versions require Electronic Accelerator Pedal from BRZ\/GT86 - \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-92-95-ep82-gt86-electronic-accelerator-pedal-mount\/\"\u003eMore info here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOEM parts not used:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eABS - Some or all parts of ABS may no longer work\u003c\/li\u003e\n\u003cli\u003eAC Vac solenoids - AC may still work but please ask to confirm\u003c\/li\u003e\n\u003cli\u003eStock idle valve\u003c\/li\u003e\n\u003cli\u003eDiagnostics port\u003c\/li\u003e\n\u003cli\u003eBattery power and ground cables - Original ones must be stripped from original wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo see the install process watch the video of a similar install but with heat shrink covering rather than braid\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=6TxAhOQTZ0o\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"Stock (OEM\/Denso) \/ Stock 4E-FTE Coil \/ Cable Throttle","offer_id":50130111005014,"sku":"","price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Stock 4E-FTE Coil \/ Drive By Wire (E-Throttle)","offer_id":50305681719638,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ K20 Coil on Plug \/ Cable Throttle","offer_id":50305681752406,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ K20 Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305681785174,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ 2ZZ\/Yaris Coil on Plug \/ Cable Throttle","offer_id":50305681817942,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ 2ZZ\/Yaris Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305681850710,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ R35 Skyline Coil on Plug \/ Cable Throttle","offer_id":50305681883478,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ R35 Skyline Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305681916246,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Other \/ Decide later \/ Cable Throttle","offer_id":50305682014550,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Other \/ Decide later \/ Drive By Wire (E-Throttle)","offer_id":50305682047318,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Stock 4E-FTE Coil \/ Cable Throttle","offer_id":50305666679126,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Stock 4E-FTE Coil \/ Drive By Wire (E-Throttle)","offer_id":50305682080086,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ K20 Coil on Plug \/ Cable Throttle","offer_id":50305682112854,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ K20 Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682145622,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ 2ZZ\/Yaris Coil on Plug \/ Cable Throttle","offer_id":50305682178390,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ 2ZZ\/Yaris Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682211158,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ R35 Skyline Coil on Plug \/ Cable Throttle","offer_id":50305682243926,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ R35 Skyline Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682276694,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Other \/ Decide later \/ Cable Throttle","offer_id":50305682374998,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Other \/ Decide later \/ Drive By Wire (E-Throttle)","offer_id":50305682407766,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Stock 4E-FTE Coil \/ Cable Throttle","offer_id":50305666711894,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Stock 4E-FTE Coil \/ Drive By Wire (E-Throttle)","offer_id":50305682440534,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ K20 Coil on Plug \/ Cable Throttle","offer_id":50305682473302,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ K20 Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682506070,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ 2ZZ\/Yaris Coil on Plug \/ Cable Throttle","offer_id":50305682538838,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ 2ZZ\/Yaris Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682571606,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ R35 Skyline Coil on Plug \/ Cable Throttle","offer_id":50305682604374,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ R35 Skyline Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682637142,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Other \/ Decide later \/ Cable Throttle","offer_id":50305682735446,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Other \/ Decide later \/ Drive By Wire (E-Throttle)","offer_id":50305682768214,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Stock 4E-FTE Coil \/ Cable Throttle","offer_id":50305666744662,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Stock 4E-FTE Coil \/ Drive By Wire (E-Throttle)","offer_id":50305682800982,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ K20 Coil on Plug \/ Cable Throttle","offer_id":50305682833750,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ K20 Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682866518,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ 2ZZ\/Yaris Coil on Plug \/ Cable Throttle","offer_id":50305682899286,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ 2ZZ\/Yaris Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682932054,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ R35 Skyline Coil on Plug \/ Cable Throttle","offer_id":50305682964822,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ R35 Skyline Coil on Plug \/ Drive By Wire (E-Throttle)","offer_id":50305682997590,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Other \/ Decide later \/ Cable Throttle","offer_id":50305683095894,"sku":null,"price":1000.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Other \/ Decide later \/ Drive By Wire (E-Throttle)","offer_id":50305683128662,"sku":null,"price":1125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/toyota-starlet-glanza-v-plug-in-wiring-loom-harness-4e5e-haltech-nexus-s2-elite-1500-ep-wiring.jpg?v=1745882401"},{"product_id":"starlet-coil-on-plug-wiring-harness","title":"Starlet Coil on Plug Wiring Harness","description":"\u003cul\u003e\n\u003cli\u003eHonda K20 (as shown in main product photos) or Toyota 2ZZ \/ Yaris (see below) Coil on Plug Wiring Harness to connect your choice of ECU. With a choice of DR-25 heat shrink or TechFlex Insultherm Fibreglass Braid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure id=\"attachment_777\" aria-describedby=\"caption-attachment-777\" style=\"width: 300px;\" class=\"wp-caption alignnone\"\u003e\n\u003cfigcaption id=\"caption-attachment-777\" class=\"wp-caption-text\"\u003eToyota 2ZZ \/ Yaris Coil connectors\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/PXL_20240301_105330013-scaled.jpg?v=1743199376\" alt=\"Toyota 2ZZ\/Yaris Coil Pack Connector | EP Wiring\"\u003e\u003cbr\u003e\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTE Spec 44 20 AWG wire rated to 150ºC\u003c\/li\u003e\n\u003cli\u003eCovered with TechFlex Insultherm braid or Raychem DR-25 heat shrink\n\u003cul\u003e\n\u003cli\u003eTerminals crimped using factory quality tools such as Mecal Crimp Press and Applicators or Rennsteig PEW 12 tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eECU pins available - Superseal 1.0 (Link, Haltech, Motec, DTA, ECU Master PRO)\u003c\/li\u003e\n\u003cli\u003eWire length suitable for RHD EP91 \u0026amp; EP82 Starlet's with ECU mounted in standard location. Custom lengths available on request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMade to order, lead time of up to 3 weeks but usually shipped within 1 week. If you need it sooner please contact first before ordering.\u003c\/strong\u003e\u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Honda K20 Coils","offer_id":50130111660374,"sku":"EPW-COP-HARN-TF-CC-BDP","price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469797206,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ R35 Skyline Coils (Hitachi)","offer_id":50316471697750,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Audi R8 Coils (Long)","offer_id":50316471730518,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Audi Short Coils","offer_id":50316471763286,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Other","offer_id":50316471796054,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ Honda K20 Coils","offer_id":50316469829974,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469862742,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ R35 Skyline Coils (Hitachi)","offer_id":50316471828822,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ Audi R8 Coils (Long)","offer_id":50316471861590,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ Audi Short Coils","offer_id":50316471894358,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ ECUMaster Black \/ Other","offer_id":50316471927126,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ Honda K20 Coils","offer_id":50316469895510,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469928278,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ R35 Skyline Coils (Hitachi)","offer_id":50316471959894,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ Audi R8 Coils (Long)","offer_id":50316471992662,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ Audi Short Coils","offer_id":50316472025430,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ DTM Terminals \/ Other","offer_id":50316472058198,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ Honda K20 Coils","offer_id":50316469961046,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469993814,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ R35 Skyline Coils (Hitachi)","offer_id":50316472090966,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ Audi R8 Coils (Long)","offer_id":50316472123734,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ Audi Short Coils","offer_id":50316472156502,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"TechFlex Insultherm Braid \/ None - Unterminated wire \/ Other","offer_id":50316472189270,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Honda K20 Coils","offer_id":50130111627606,"sku":"EPW-COP-HARN-DR-25-BDP","price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469567830,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ R35 Skyline Coils (Hitachi)","offer_id":50316471173462,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Audi R8 Coils (Long)","offer_id":50316471206230,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Audi Short Coils","offer_id":50316471238998,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ Superseal 1.0 (Link -Haltech - Motec - Emtron - etc) \/ Other","offer_id":50316471271766,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ Honda K20 Coils","offer_id":50316469600598,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469633366,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ R35 Skyline Coils (Hitachi)","offer_id":50316471304534,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ Audi R8 Coils (Long)","offer_id":50316471337302,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ Audi Short Coils","offer_id":50316471370070,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ ECUMaster Black \/ Other","offer_id":50316471402838,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ Honda K20 Coils","offer_id":50316469666134,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469698902,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ R35 Skyline Coils (Hitachi)","offer_id":50316471435606,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ Audi R8 Coils (Long)","offer_id":50316471468374,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ Audi Short Coils","offer_id":50316471501142,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ DTM Terminals \/ Other","offer_id":50316471533910,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ Honda K20 Coils","offer_id":50316469731670,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ Toyota 2ZZ\/Yaris Coils","offer_id":50316469764438,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ R35 Skyline Coils (Hitachi)","offer_id":50316471566678,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ Audi R8 Coils (Long)","offer_id":50316471599446,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ Audi Short Coils","offer_id":50316471632214,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true},{"title":"DR-25 Heat Shrink \/ None - Unterminated wire \/ Other","offer_id":50316471664982,"sku":null,"price":190.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/starlet-coil-on-plug-wiring-harness-ep-wiring.jpg?v=1745882433"},{"product_id":"toyota-starlet-ep91-plug-in-wiring-loom-link-g4x-monsoon-atom","title":"Toyota Starlet EP91 Plug-in Wiring Loom - Link G4X Monsoon \/ Atom","description":"\u003cp\u003eLooking to install a Link ECU in your 1996-1999 EP91 Toyota Starlet but unsure about wiring? Our solution: an off-the-shelf plug-in wiring harness!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree variable TPS sensor mount included! \u003c\/strong\u003eRequired for \u003cspan style=\"text-decoration: underline;\"\u003efactory manual 4E-FTE\u003c\/span\u003e cars with non-variable OEM sensor. TPS Sensor not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM \/ UK \/ Irish \/ Aus - RHD 4E-FTE\/FE only\u003c\/strong\u003e - other models still possible but are a custom order so get in touch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's a plug-in wiring harness?\u003c\/h3\u003e\n\u003cp\u003eUnlike a patch harness, a plug-in wiring harness is a complete replacement for the engine wiring, see the diagram below for the 98\/99 Glanza V, highlighted in green. This harness seamlessly connects to the engine bay fusebox and interior body connectors (2\/3, depending on your year\/country\/engine). Most factory functions are retained; details on what stays and what doesn't are further explained below. The harness doesn't include a new battery cable, so you'll need to strip this from your existing wiring (check out the video at the bottom of this page for a guide). However, we're considering offering this in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/Screenshot_2026-02-08_211700.png?v=1770585457\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIs your build ever evolving? This wiring harness allows easy changes to injectors, coils, and additional features as required.\u003c\/h3\u003e\n\u003cp\u003eThis harness uses sub harnesses with Deutsch\/Amphenol DTM\/ATM plugs for injectors, coils and additional features so you can change what you need to when you need to. We also supply the pinouts for these connectors so any competent wiring DIYer can make the changes themselves!\u003c\/p\u003e\n\u003ch3\u003eI don't see any options for fuel\/oil pressure sensors or other features, can these be added?\u003c\/h3\u003e\n\u003cp\u003eYes! We include 2 breakout connectors for this purpose, one in the engine bay and another in the interior. Because everyone's build is different, we decided the best approach would be a modular harness. This means everyone has the same main harness, which keeps costs low, and people can then choose to have whatever extra features they would like. To order custom additions, please get in touch!\u003c\/p\u003e\n\u003ch3\u003eHave questions?\u003c\/h3\u003e\n\u003cp\u003eCall us on \u003ca href=\"tel:+441475325091\"\u003e+44 1475 325 091\u003c\/a\u003e or message us via the \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003econtact page\u003c\/a\u003e, \u003ca href=\"https:\/\/www.instagram.com\/ep_wiring\/\"\u003eInstagram\u003c\/a\u003e or \u003ca href=\"https:\/\/www.facebook.com\/epwiring\"\u003eFacebook.\u003c\/a\u003e We're here to help!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eJDM 4E-FTE\/FE, RHD UK\/Irish\/Aus 4E-FTE\/FE\u003c\/strong\u003e models\u003c\/li\u003e\n\u003cli\u003eManufactured using Tefzel (ETFE) wire - rated up to 150ºC (OEM is rated to 80ºC)\u003c\/li\u003e\n\u003cli\u003eLoom is covered using high temperature fibreglass braid- rated over 600ºC\u003c\/li\u003e\n\u003cli\u003eInjectors and Coils are on sub harasses so these can be changed in the future! Sub harnesses are available to order by contacting us or listed on the website around June 2024\u003c\/li\u003e\n\u003cli\u003eChoice of stock injector, EV14\/USCAR or Bosch EV1 connectors.\u003c\/li\u003e\n\u003cli\u003eChoice of stock coil, K20 COP (coil on plug) or 2ZZ\/Yaris COP.\u003c\/li\u003e\n\u003cli\u003eThe harness is modular so you can customise the additional inputs and outputs! Common options are fuel or oil pressure, flex fuel sensor, clutch switch etc... Customisations will be available to order on the website by June 2024 in the meantime \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch with your requirements for a quote and to order\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in house using production line tooling by Komax, Mecal, Rennsteig, Knipex, DMC, TE, RaceSpec, Ideal and Sargent. For ultimate reliability no cheap generic tools will be used in the construction of your wiring harness, Toyota didn't so neither will we!\u003c\/li\u003e\n\u003cli\u003eQuality control including crimp height measurement and point to point pin testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specs and Connectors\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Link G4X\/G4+ Atom or Monsoon (Can be modified to also fit Storm, Xtreme and Fury but won't be wired for the additional features - please \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch\u003c\/a\u003e if you have one of these ECU's for a custom order)\u003c\/li\u003e\n\u003cli\u003eTriggering - Stock \u003cstrong\u003e4E-FTE\u003c\/strong\u003e cam sensor (Crank Trigger can be added on as a custom change - please contact us)\u003c\/li\u003e\n\u003cli\u003eIntake Air Temp Sensor - Bosch 2 wire sensor connector - Sensor not included\u003c\/li\u003e\n\u003cli\u003eCoolant Sensor (ECT) - Bosch 2 wire or OEM Toyota 3 wire - Sensor not included\u003c\/li\u003e\n\u003cli\u003eThrottle Position (TPS) - \u003cstrong\u003eEP Wiring Bosch TPS mount kit included!\u003c\/strong\u003e - Sensor not included\u003c\/li\u003e\n\u003cli\u003eInjectors - Choice of Stock Toyota (aka Denso style), Bosch EV14\/USCAR (ID 1050X, EV14 etc) or Bosch EV1 (Junior Power Timer)\u003c\/li\u003e\n\u003cli\u003eCoils - Choice of Factory 4E-FTE, K20 Coil on Plug or 2ZZ\/Yaris Coil on Plug - Coil packs not included\u003c\/li\u003e\n\u003cli\u003eGround Ring Terminals for Coils, AUX, CAN and ECU\u003c\/li\u003e\n\u003cli\u003eKnock Sensor Wiring for Bosch 0261231006 - Sensor not included\u003c\/li\u003e\n\u003cli\u003eBoost Solenoid (MAC solenoid) - \u003ca href=\"https:\/\/ep-wiring.com\/product\/mac-boost-solenoid\/\"\u003eSolenoid not included - can be ordered from here!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEngine Bay AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and 2 Av\/Digital inputs)\u003c\/li\u003e\n\u003cli\u003eCabin AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and 2 Av\/Digital, 1 Digital inputs, 2 Outputs)\u003c\/li\u003e\n\u003cli\u003eCAN Plug next to ECU wired to suit LinkECU products such as CAN Lambda, \u003ca href=\"https:\/\/ep-wiring.com\/product-category\/link-ecu\/accessories\/driver-displays\/\"\u003eGauges or Dashes\u003c\/a\u003e etc - Pins can be rearranged DIY to suit Haltech\/others.\u003c\/li\u003e\n\u003cli\u003eOEM Check Engine Light\u003c\/li\u003e\n\u003cli\u003eOEM Tacho signal for stock gauge cluster - Tacho modification by soldering a 1kohm resistor in gauge cluster (\u003ca href=\"https:\/\/www.youtube.com\/watch?v=tOHkLjdutHI\u0026amp;ab_channel=EPWiring\"\u003eCheck our our DIY video\u003c\/a\u003e) or by wiring in something like a \u003ca href=\"https:\/\/www.haltech.com\/product\/ht-038006-tacho-output-adaptor\/\"\u003eHaltech Tacho Output Adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOil pressure light by OEM switch - If using oil pressure sensor on AUX plug you can wire the ECU to the Oil pressure light - ask for this in the order comments\u003c\/li\u003e\n\u003cli\u003eOEM Boost Switch\u003c\/li\u003e\n\u003cli\u003eAlternator wiring\u003c\/li\u003e\n\u003cli\u003eOEM fan switch - 98-99 cars only\u003c\/li\u003e\n\u003cli\u003eBrake fluid level connector\u003c\/li\u003e\n\u003cli\u003eFuel Pump relay trigger from ECU output\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor Signal from Stock Gauge Cluster - If you are using a digital dash this will not work\u003c\/li\u003e\n\u003cli\u003eWindscreen wiper wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot included but required for fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLink AtomX \u003c\/strong\u003ewill require a Manifold Pressure (MAP) Sensor. This can easily be added via sub harness on Engine Bay AUX plug.\u003c\/li\u003e\n\u003cli\u003eECU mount - To make your life easier we \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-ecu-mounting-plate\/\"\u003emade ECU mounting plates\u003c\/a\u003e and they are \u003cstrong\u003eFREE\u003c\/strong\u003e with every \u003cstrong\u003eLink ECU wire-in ECU purchase - UK ONLY\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOEM parts not used:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eABS - Some or all parts of ABS may no longer work. If required it is additional cost\u003c\/li\u003e\n\u003cli\u003eAC Vac solenoids - AC may still work, ask to confirm\u003c\/li\u003e\n\u003cli\u003eStock idle valve\u003c\/li\u003e\n\u003cli\u003eDiagnostics port\u003c\/li\u003e\n\u003cli\u003eBattery power and ground cables - Original ones must be stripped from original wiring or \u003ca href=\"https:\/\/ep-wiring.com\/product\/starlet-glanza-v-1996-1997-alternator-power-wiring\/\"\u003e1996-1997 cars can purchase our replacement wiring here\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo see the install process watch the video of a similar install but with heat shrink covering rather than braid\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=6TxAhOQTZ0o\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"Stock (OEM\/Denso) \/ Stock 4E-FTE Coil","offer_id":50305702527318,"sku":"EPW-EP91-PLUGIN-HARN-1","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ K20 Coil on Plug","offer_id":50305702560086,"sku":"EPW-EP91-PLUGIN-HARN-2","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305702592854,"sku":"EPW-EP91-PLUGIN-HARN-3","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ R35 Skyline Coil on Plug","offer_id":50305702625622,"sku":"EPW-EP91-PLUGIN-HARN-4","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Other \/ Decide later","offer_id":50305702691158,"sku":"EPW-EP91-PLUGIN-HARN-6","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Stock 4E-FTE Coil","offer_id":50305702723926,"sku":"EPW-EP91-PLUGIN-HARN-7","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ K20 Coil on Plug","offer_id":50305702756694,"sku":"EPW-EP91-PLUGIN-HARN-8","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305702789462,"sku":"EPW-EP91-PLUGIN-HARN-9","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ R35 Skyline Coil on Plug","offer_id":50305702822230,"sku":"EPW-EP91-PLUGIN-HARN-10","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Other \/ Decide later","offer_id":50305702887766,"sku":"EPW-EP91-PLUGIN-HARN-12","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Stock 4E-FTE Coil","offer_id":50305702920534,"sku":"EPW-EP91-PLUGIN-HARN-13","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ K20 Coil on Plug","offer_id":50305702953302,"sku":"EPW-EP91-PLUGIN-HARN-14","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305702986070,"sku":"EPW-EP91-PLUGIN-HARN-15","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ R35 Skyline Coil on Plug","offer_id":50305703018838,"sku":"EPW-EP91-PLUGIN-HARN-16","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Other \/ Decide later","offer_id":50305703084374,"sku":"EPW-EP91-PLUGIN-HARN-18","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Stock 4E-FTE Coil","offer_id":50305703117142,"sku":"EPW-EP91-PLUGIN-HARN-19","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ K20 Coil on Plug","offer_id":50305703149910,"sku":"EPW-EP91-PLUGIN-HARN-20","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ 2ZZ\/Yaris Coil on Plug","offer_id":50305703182678,"sku":"EPW-EP91-PLUGIN-HARN-21","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ R35 Skyline Coil on Plug","offer_id":50305703215446,"sku":"EPW-EP91-PLUGIN-HARN-22","price":850.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Other \/ Decide later","offer_id":50305703280982,"sku":"EPW-EP91-PLUGIN-HARN-24","price":850.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/toyota-starlet-ep91-plug-in-wiring-loom-link-g4x-monsoon-atom-ep-wiring.jpg?v=1745882447"},{"product_id":"link-can-lambda-wideband-module-with-bosch-4-9-sensor","title":"Link CAN Lambda Wideband Module with Bosch 4.9 sensor","description":"\u003cp\u003eThe CAN Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments on the fly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSorry we are unable to sell Link ECU items outside of the UK!\u003cbr\u003e\nUK customers, please allow an additional 2-5 working days for delivery for Link ECU products. Please note that all Link products are supplied to us by \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=1xmz7jKbmq0\u003c\/p\u003e\n\u003cp\u003eBeing fully digital the CAN Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: 800;\"\u003e\u003cb\u003e\u003cstrong\u003eBox Contents\u003c\/strong\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul style=\"font-weight: 400;\"\u003e\n\u003cli\u003eCAN-Lambda device\u003c\/li\u003e\n\u003cli\u003eBosch LSU4.9 Sensor\u003c\/li\u003e\n\u003cli\u003eDeutsch 4-Way Connector Kit\u003c\/li\u003e\n\u003cli\u003eO2 Bung and Plug\u003c\/li\u003e\n\u003cli\u003e2 Large Stickers\u003c\/li\u003e\n\u003cli\u003e2 Small Stickers\u003c\/li\u003e\n\u003cli\u003eQuick Start Quide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\"\u003eLink’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf using the CAN Lambda with a G4+\/G4X PlugIn ECU use a Link \u003c\/span\u003e\u003ca style=\"font-weight: 400;\" href=\"http:\/\/dealers.linkecu.com\/CANPCB_2\"\u003eCANPCB\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e cable to access the CAN port on the PlugIn PCB and a Link \u003c\/span\u003e\u003ca style=\"font-weight: 400;\" href=\"http:\/\/dealers.linkecu.com\/CANF_2\"\u003eCANF\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e field insertable CAN plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cem\u003ePlease note proper CAN protocol must be followed. See manual below for guidance.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"http:\/\/www.linkecu.com\/documentation\/CAN-LambdaQuickstartGuide.pdf\"\u003eDownload the CAN-Lambda QuickStart Guide \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"http:\/\/linkecu.com\/documentation\/canlambda.pdf\"\u003eDownload the CAN-Lambda manual\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130112610646,"sku":"125-1000","price":408.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-can-lambda-wideband-module-with-bosch-4_9-sensor-link-ecu.jpg?v=1745882477"},{"product_id":"link-mxs-strada-5-dash-street-edition","title":"LINK MXS Strada 5\" Dash - Street Edition","description":"\u003cp\u003eThe Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+\/G4X Wire-In and Plug-in ECU's. See features tab for more information.\u003c\/p\u003e\n\n\u003cp\u003eLink MXS Strada 5” dash, powered by AIM.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the 'Street edition', please see the 'Race edition' if you are looking for a dash for motorsport purposes. \u003ca href=\"https:\/\/ep-wiring.com\/product\/aim-7-dash-mxg-strada-street-edition\/\"\u003eThis dash is also available in a 7” version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eThe Link MXS Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 5” TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display.\u003c\/p\u003e\n\u003cp\u003eThe 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 6 Street Icons located to the side of the screen. These include an indicator light, headlight, high beam, check engine, oil pressure warning light and temperature warning light.\u003c\/p\u003e\n\u003cp\u003eThe dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more.\u003c\/p\u003e\n\u003cp\u003eThe Link MXS connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).\u003c\/p\u003e\n\u003cp\u003eThe dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software.\u003c\/p\u003e\n\u003cp\u003eIncluded in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLink MXS 1.2 Strada\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003e14 pin standard wiring\u003c\/li\u003e\n\u003cli\u003e23 pin connector + contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ep-wiring.com\/product\/aim-gps09-module\/\"\u003eGPS module available separately\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDimensions: 169.4x97x23 mm\u003cbr\u003e\nWeight: 480 g\u003cbr\u003e\nPower consumption: 400 mA\u003cbr\u003e\nWaterproof: IP65\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130113134934,"sku":"100-0168","price":1200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-mxs-strada-5-dash-street-edition-link-ecu.jpg?v=1745882532"},{"product_id":"link-ecu-loom-a-2-5m-all-wirein-ecus","title":"Link ECU Loom A (2.5m) - All wireIn ECUs","description":"\u003cp\u003e2.5 m long 'A' loom to suit G4, G4+ and G4X ECUs\u003c\/p\u003e\n\u003cp\u003ePerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 5m lengths.\u003c\/p\u003e\n\n\u003cp\u003eAdded features of 2.5m and 5m ‘A’ Looms include:\u003cbr\u003e\n-Shielded Dual Core wires for trigger signals\u003cbr\u003e\n-Added ground and 5V wires spliced in with labels suggesting pin use\u003c\/p\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Link G4X WireIn ECU’s (Note: Loom B will also be required for the Storm\/Fury\/Xtreme)\u003c\/li\u003e\n\u003cli\u003eLink G4+ Thunder (Note: Loom B and connector kits C and D may also be required)\u003c\/li\u003e\n\u003cli\u003eLink G4+ Atom (NB: Does NOT suit the earlier G4 Atom models. I.e. G4+ only)\u003c\/li\u003e\n\u003cli\u003eLink G4+ Atom II\u003c\/li\u003e\n\u003cli\u003eLink G4+ Monsoon\u003c\/li\u003e\n\u003cli\u003eLink G4 Storm\u003c\/li\u003e\n\u003cli\u003eLink G4+ Storm Blue\u003c\/li\u003e\n\u003cli\u003eLink G4+ Storm Black (Note: Loom B will also be required)\u003c\/li\u003e\n\u003cli\u003eLink G4 RX\u003c\/li\u003e\n\u003cli\u003eLink G4+ Fury (Note: Loom B will also be required)\u003c\/li\u003e\n\u003cli\u003eLink G4 Xtreme (Note: Loom B will also be required)\u003c\/li\u003e\n\u003cli\u003eLink G4+ Xtreme (Note: Loom B will also be required)\u003c\/li\u003e\n\u003cli\u003eVipec V44\u003c\/li\u003e\n\u003cli\u003eVipec i44\u003c\/li\u003e\n\u003cli\u003eVipec V88 (Note: Loom B will also be required)\u003c\/li\u003e\n\u003cli\u003eVipec i88 (Note: Loom B will also be required)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130118967638,"sku":"101-0005","price":186.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-ecu-loom-a-2_5m-all-wirein-ecus-link-ecu_28a2dd1a.jpg?v=1747644027"},{"product_id":"link-e-throttle-module-dbw","title":"Link E-Throttle Module (DBW)","description":"\u003cp\u003eLink's E-throttle module (Drive by Wire) works with Link's G4X ECUs (\u003cstrong\u003eexcept the entry level AtomX\u003c\/strong\u003e), plus G4+ ECUs (\u003cstrong\u003eStorm and above\u003c\/strong\u003e) to give you full control of your throttle setup, allowing a faster more precise throttle response.\u003c\/p\u003e\n\n\u003cp\u003eReplace your old mechanical throttle linkage with an advanced electronic throttle module. E-throttle is faster responding, requires less maintenance, gives you better fuel economy and lowers emissions.\u003c\/p\u003e\n\u003cp\u003eThe Remote E-throttle module is designed to be used with any Link G4X ECU (except the entry level AtomX) and any Link G4+ ECU (Storm and above). It is most commonly used to provide e-throttle control to the MonsoonX, StormX or PlugINX ECUs or secondary E-throttle control to the XtremeX or FuryX ECUs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/linkecu.com\/documentation\/Ethrottlewiring.png\"\u003eWiring Diagram\u003c\/a\u003e (Example)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe external electronic throttle control module can be wired as in output interface for ECUs that do not support electronic throttle control internally.\u003c\/li\u003e\n\u003cli\u003eThe module requires three auxiliary outputs from the ECU. Signals '1' and '2' control the output drive signals from the module and 'Enable' signal disconnects power from the internal electronic throttle drive.\u003c\/li\u003e\n\u003cli\u003eSignal 1 must be connected to the first Auxiliary in the selected pair.\u003c\/li\u003e\n\u003cli\u003eSignal 2 must be connected to the second Auxiliary in the selected pair.\u003c\/li\u003e\n\u003cli\u003eEnable must be connected to the selected E-Throttle Relay Auxiliary.\u003c\/li\u003e\n\u003cli\u003eThe power for the device needs to come from the main relay. Power should ONLY be present at key on\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlease Note: This will also require 4 An Volt Inputs (2X TPS from throttle body and 2X TPS from the pedal)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130119164246,"sku":"115-1000","price":342.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-e-throttle-module-dbw-link-ecu.jpg?v=1745882633"},{"product_id":"link-razor-pdm","title":"Link Razor PDM","description":"\u003cp\u003eLink's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eSorry we are unable to sell Link ECU items outside of the UK!\u003cbr\u003e\nUK customers, please allow an additional 2-5 working days for delivery for Link ECU products. Please note that all Link products are supplied to us by \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Razor PDM is a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands can be triggered when your vehicle hits specific parameters.\u003c\/p\u003e\n\u003cp\u003eThe device will allow you to manage things such as fuel pumps, radiator fans, electronic throttles, servos, lights and more, as well as monitoring analog or digital sensor signals.\u003c\/p\u003e\n\u003cp\u003eYou can gain full control by using an Analog Switch Panel, CAN Keypad or ECU to switch output channels, as well as increasing reliability and protecting your critical components from damage.\u003c\/p\u003e\n\u003cp\u003eWith superior thermal performance, the Razor PDM has been designed with vehicle protection in mind, while allowing for a more efficient, cleaner, and reliable build.\u003c\/p\u003e\n\u003cp\u003eIt may be small and compact, but the Razor PDM can handle up to 100 Amps of continuous combined current, as well as 160A of non-repetitive maximum current. If you need to manage even more power, you can easily add multiple Razor PDM’s via CAN or use as a CAN Expander to increase your inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eThe Razor PDM has the ability to connect with many other ECU brands and CAN devices when using a custom CAN stream. Those of you with a Link ECU will be pleased to know that our software comes with a pre-configured stream, so your Link products will work with the device straight out of the box.\u003c\/p\u003e\n\u003cp\u003eSetup and management of the Razor PDM is performed through our custom PDM Link software, which is \u003ca href=\"https:\/\/linkecu.com\/software-support\/pdm-link-downloads\/\"\u003efree to download\u003c\/a\u003e and use.\u003c\/p\u003e\n\u003cp\u003eIn the box:\u003c\/p\u003e\n\u003cp\u003e• Link Razor PDM\u003cbr\u003e\n• Mounting plate and screws\u003cbr\u003e\n• Superseal Plug and Pin Kit\u003cbr\u003e\n• USB-C connection cable\u003cbr\u003e\n• Positive terminal insulation boot\u003cbr\u003e\n• 2 x high-current ring terminals and bolts\u003cbr\u003e\n• Quickstart guide\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e• Can be used in conjunction with a Link ECU or as a completely standalone device\u003cbr\u003e\n• 4 high power outputs capable of 25A continuous, PWM, high side drive, low side drive, or paired for H-bridge actuator motor control\u003cbr\u003e\n• 8 Universal A\/D I\/O pins, capable of 8A output each or as analog or digital inputs. Software controlled pull-ups and adjustable switching thresholds when used as inputs\u003cbr\u003e\n• Over-Current and Short Circuit Protection, with configurable trip and resettable fuse parameters\u003cbr\u003e\n• Flexible and powerful control strategies including internal general purpose PID control, math functions, logic expressions and CAN keypad functions\u003cbr\u003e\n• CAN keypad integration and flexible button logic, buttons can control PDM or Link ECU functions (G4X or G4+ with some limitations)\u003cbr\u003e\n• Logging support via CAN or USB\u003cbr\u003e\n• Multiple PDM support - Add additional units and simply connect via CAN\u003cbr\u003e\n• USB Configuration via PDM Link software (Windows only)\u003cbr\u003e\n• 26 pin Superseal connector\u003cbr\u003e\n• Fully sealed CNC aluminium enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClick \u003ca href=\"http:\/\/linkecu.com\/documentation\/Razor-PDM-Spec-Sheet.pdf\"\u003ehere\u003c\/a\u003e to download the full Specifications PDF.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130119295318,"sku":"135-1000","price":990.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-razor-pdm-link-ecu.jpg?v=1745882644"},{"product_id":"link-g4x-furyx-ecu","title":"Link G4X FuryX ECU","description":"\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eA premium ECU with Onboard Digital Wideband.\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications \u0026amp; a huge 512 megabytes of data logging!\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eWith 8 injector drives and 6 ignition drives, the FuryX can control up to 3 rotors or 6 cylinders with sequential injection and direct spark, making it an excellent choice for professional level motorsport or more demanding road car applications.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe added benefit of a Onboard Digital Wideband Lambda Controller means higher accuracy of the unit, plus a simple setup.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe FuryX comes supplied with stickers, a quickstart guide, a mounting bracket and a USB tuning cable. Requires 'A' \u0026amp; 'B' Looms or 'A' \u0026amp; 'B' Pin Kits, not supplied.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eSee the Specifications tab for a full list of specifications.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eSPEC OVERVIEW:\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eInputs\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e8\/10* x Digital inputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e4 x Temperature inputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e9 x Analog inputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e2 x Trigger inputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e2 x Knock inputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e1 x LSU 4.9 Wideband lambda sensor input\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e8 x Injection drives\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e6 x Ignition drivers\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e10 x Auxiliary outputs^\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e+5V Sensor power supply\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e+8V Sensor power supply\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e^unused fuel and ignition drives can be used as additional Aux outputs\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eCommunications\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e2* x CAN bus\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e1x Serial (RS232) connection\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e1x USB tuning connection\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eDimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms)\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eMass: 680grams\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cem\u003e*DI 9 \u0026amp; 10 pins used by second CAN Bus \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cem\u003eWhat's in the box?\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eSupplied with USB tuning cable and mounting bracket.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eRequires “A” \u0026amp; “B” looms or “A” \u0026amp; “B” connector kits (not supplied).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130119393622,"sku":"122-4000","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-g4x-furyx-ecu-link-ecu.png?v=1745882656"},{"product_id":"link-g4x-monsoonx-ecu","title":"Link G4X MonsoonX ECU","description":"\u003ch3\u003eMore features, more powerful.\u003c\/h3\u003e\n\u003cp\u003eThe MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as single precision floating point format fuel tables, better resolution within ignition timing and faster communications. These upgrades make the G4X Monsoon a true powerhouse in a small shell.\u003c\/p\u003e\n\u003cp\u003eG4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 kSamples\/sec.\u003c\/p\u003e\n\u003cp\u003eWith the MonsoonX you have all the tuning capabilities of the AtomX, but you can also choose to run some of the following features: Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. It also comes with a built in 4 bar or 7 bar MAP sensor further reducing installation cost. Now featuring Knock Control.\u003c\/p\u003e\n\u003cp\u003eNote: The MonsoonX will run any of the above features, but it cannot run them all at once. The number of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs.\u003c\/p\u003e\n\u003cp\u003eThe MonsoonX will control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire.\u003c\/p\u003e\n\u003cp\u003eThis makes it ideal for naturally aspirated or turbocharged engines that just need a retune and one or two extra features, so you don’t need to jump up to one of our higher-level ECUs.\u003c\/p\u003e\n\u003cp\u003eRequires A Loom\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=6BTMdev1d8U\u003c\/p\u003e\n\u003cp\u003eSPEC OVERVIEW\u003c\/p\u003e\n\u003cp\u003eThe MonsoonX is ideal for:\u003c\/p\u003e\n\u003cp\u003e1-12 Cylinder Distributed\u003c\/p\u003e\n\u003cp\u003e2-8 Cylinder Wasted Spark\u003c\/p\u003e\n\u003cp\u003e1-4 Cylinder Direct Spark\u003c\/p\u003e\n\u003cp\u003eOdd Fire Engines\u003c\/p\u003e\n\u003cp\u003e2-Stroke Engines\u003c\/p\u003e\n\u003cp\u003eConfigurable Firing Order\u003c\/p\u003e\n\u003cp\u003eConfigurable TDC Points (for odd fire)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInputs\u003c\/p\u003e\n\u003cp\u003e4 x Digital inputs\u003c\/p\u003e\n\u003cp\u003e2 x Temperature inputs\u003c\/p\u003e\n\u003cp\u003e4 x Analog inputs\u003c\/p\u003e\n\u003cp\u003e2 x Trigger inputs\u003c\/p\u003e\n\u003cp\u003e1 x Knock Input (Shared with DI4)\u003c\/p\u003e\n\u003cp\u003e1 x Onboard 4 Bar MAP sensor\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOutputs\u003c\/p\u003e\n\u003cp\u003e4 x Injector drives\u003c\/p\u003e\n\u003cp\u003e4 x Ignition drivers\u003c\/p\u003e\n\u003cp\u003e6 x Auxiliary outputs^\u003c\/p\u003e\n\u003cp\u003e+5V Sensor power supply\u003c\/p\u003e\n\u003cp\u003e^unused ignition drives can be used as additional Aux outputs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCommunications\u003c\/p\u003e\n\u003cp\u003e1x CAN bus\u003c\/p\u003e\n\u003cp\u003e1x USB tuning connection\u003c\/p\u003e\n\u003cp\u003eUpgraded communications chip (four times faster than G4+)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePhysical:\u003c\/p\u003e\n\u003cp\u003eDimensions: 95mm(L) x 130mm(W) x 45mm(H) (without loom)\u003c\/p\u003e\n\u003cp\u003eWeight: 220 grams\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAdvanced features not found on the AtomX:\u003c\/p\u003e\n\u003cp\u003eAntilag, rolling antilag and launch control.\u003c\/p\u003e\n\u003cp\u003eUp to 2 fully variable closed loop VVT cams.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMisc:\u003c\/p\u003e\n\u003cp\u003e512MB of logging memory\u003c\/p\u003e\n\u003cp\u003e20 general purpose tables\u003c\/p\u003e\n\u003cp\u003eRuns on PC Link software for G4X\u003c\/p\u003e\n\u003cp\u003eThe MonsoonX comes supplied with waterproof connectors, a mounting bracket and a USB tuning cable. “A Loom” to be purchased separately.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"http:\/\/linkecu.com\/documentation\/MonsoonXQuickstartGuide.pdf\"\u003e\u003cb\u003e\u003cstrong\u003eDownload the MonsoonX Quickstart Guide \u003c\/strong\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.linkecu.com\/software-support\/pc-link-downloads\/\"\u003eDownload the latest G4X PC Link version\u003c\/a\u003e\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130119852374,"sku":"127-4000","price":1198.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-g4x-monsoonx-ecu-link-ecu.jpg?v=1745882662"},{"product_id":"link-g4x-atomx-ecu","title":"Link G4X AtomX ECU","description":"\u003ch3\u003eSmall, but mighty!\u003c\/h3\u003e\n\u003cp\u003eThe Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has expanded data logging and uses the same microcontroller as the entire G4X range! It is more responsive and has higher bandwidth than its G4+ Atom II predecessor.\u003c\/p\u003e\n\u003cp\u003eG4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 kSamples\/sec.\u003c\/p\u003e\n\u003cp\u003eG4X features 8 x faster communications speed, allowing you to download logs 8 x faster and pushes all the logging quickly up to a new and improved PCLink – available for download below in the features tab.\u003c\/p\u003e\n\u003cp\u003eThe AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control.\u003c\/p\u003e\n\u003cp\u003eThis makes it ideal for naturally aspirated engines that just need a re-tune and don't need all the extra sensors and features that come with our higher level ECUs.\u003c\/p\u003e\n\u003cp\u003eRequires \"A\" loom.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=mq553wj0Wh0\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe AtomX is ideal for: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1-12 Cylinder Distributed\u003c\/li\u003e\n\u003cli\u003e2-8 Cylinder Wasted Spark\u003c\/li\u003e\n\u003cli\u003e1-4 Cylinder Direct Spark\u003c\/li\u003e\n\u003cli\u003eOdd Fire Engines\u003c\/li\u003e\n\u003cli\u003e2-Stroke Engines\u003c\/li\u003e\n\u003cli\u003eConfigurable Firing Order\u003c\/li\u003e\n\u003cli\u003eConfigurable TDC Points (for odd fire)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Digital inputs\u003c\/li\u003e\n\u003cli\u003e2 x Temperature inputs\u003c\/li\u003e\n\u003cli\u003e3 x Analog inputs\u003c\/li\u003e\n\u003cli\u003e2 x Trigger inputs\u003c\/li\u003e\n\u003cli\u003e1 x Knock Input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Injector drives\u003c\/li\u003e\n\u003cli\u003e4 x Ignition drivers\u003c\/li\u003e\n\u003cli\u003e4 x Auxiliary outputs^\u003c\/li\u003e\n\u003cli\u003e+5V Sensor power supply\u003c\/li\u003e\n\u003cli\u003e^unused ignition drives can be used as additional Aux\u003cbr\u003eoutputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommunications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x CAN bus\u003c\/li\u003e\n\u003cli\u003e1x USB tuning connection\u003c\/li\u003e\n\u003cli\u003e1 x thirty four pin, waterproof connector\u003c\/li\u003e\n\u003cli\u003eUpgraded Communications Chip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisc: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes loaded with all of Link ECU's standard features.\u003c\/li\u003e\n\u003cli\u003e512MB of logging memory\u003c\/li\u003e\n\u003cli\u003e20 general purpose tables\u003c\/li\u003e\n\u003cli\u003eRuns on PC Link software for G4X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions: 90mmL x 130mmW x 45mmH (without loom)\u003c\/p\u003e\n\u003cp\u003eWeight: 180 grams\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AtomX ECU is supplied with a USB tuning cable, mounting bracket and four Link ECU stickers.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"http:\/\/linkecu.com\/documentation\/AtomXQuickstartGuide.pdf\"\u003e\u003cb\u003e\u003cstrong\u003eDownload AtomX Quickstart Guide \u003c\/strong\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.linkecu.com\/software-support\/pc-link-downloads\/\"\u003eDownload G4X PC Link Tuning software\u003c\/a\u003e\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cem\u003ePlease allow an additional 2-5 working days for delivery for Link ECU products. Please note that all Link products are supplied to us by \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eLink ECU products may require an extra 1–5 business days for delivery. We are a Link ECU sub dealer via \u003ca href=\"https:\/\/dynatune.co.uk\/\"\u003eDynaTune\u003c\/a\u003e in East Kilbride.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":50130119983446,"sku":"111-4000","price":942.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/link-g4x-atomx-ecu-link-ecu.jpg?v=1745882670"},{"product_id":"pre-order-dbw-throttle-body-adapter-for-4e-fte-intake","title":"DBW Throttle Body Adapter for 4E-FTE Intake","description":"\u003cp\u003eEP Wiring DBW Throttle Body Adapter for Toyota Starlet 4E-FTE Intake Manifold\u003c\/p\u003e\n\u003cp\u003eOur solution to fitting a Bosch 54mm electronic DBW (Drive By Wire) throttle body to your 4E-FTE intake manifold!\u003c\/p\u003e\n\u003cp\u003eCheck out our fitting video below\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=lSw4Z8p2E-Q\u003c\/p\u003e\n\u003cp\u003eIf you're looking to convert your Toyota 4E-FTE engine to Drive by Wire, then this bolt in solution will allow you to fit a Link ECU (Bosch) 54mm electronic throttle body.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in the UK.\u003c\/li\u003e\n\u003cli\u003eWe chose a quality UK based machining partner who use Mazak and Haas CNC machines with experience in producing Motorsport performance parts.\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet 6082 T6 aluminium and anodised clear.\u003c\/li\u003e\n\u003cli\u003eThe adapter is tapered to allow a smooth transition from 54mm to the stock 50mm intake.\u003c\/li\u003e\n\u003cli\u003e4E-FTE intake is suitable for decent power (\u003ca href=\"https:\/\/www.instagram.com\/gt_advance_\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e@gt_advance_\u003c\/a\u003e made over\u003ca href=\"https:\/\/www.ukstarletowners.com\/topic\/65462-372bhp-typemr-gt-advance\/?do=findComment\u0026amp;comment=1247425\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e 400+ bhp with aftermarket cams on 99ron pump fuel\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eBolts onto the stock 4E-FTE intake manifold using new M8 bolts (supplied).\u003c\/li\u003e\n\u003cli\u003eSuitable for use with Link ECU (Bosch 0280750150) 54mm DBW Throttle Body.\u003c\/li\u003e\n\u003cli\u003eComes with o-ring gasket, 4x M8 bolts, 4X M6 bolts for throttle body and 4X M6 washers.\u003c\/li\u003e\n\u003cli\u003eIt is recommended you replace the OEM Toyota 4E-FTE intake\/throttle body gasket (Toyota 22271-11030) \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eOff road use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis part compliments our \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-electronic-accelerator-pedal-mount\/\"\u003eEP91 Electronic Accelerator Pedal mount\u003c\/a\u003e which is also available for purchase on the store.\u003c\/p\u003e\n\u003ch3\u003eBenefits of Drive By Wire\u003c\/h3\u003e\n\u003cp\u003eI'll let Andre from the High Performance Academy explain some of the key advantages in the below video.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=HWiiqNeAmzk\u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"Default Title","offer_id":50130120933718,"sku":"EPW-4EFTE-DBW-TBA","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/pre-order-dbw-throttle-body-adapter-for-4e-fte-intake-ep-wiring.jpg?v=1745882719"},{"product_id":"toyota-starlet-ep91-plug-in-wiring-loom-haltech-550-750-t1-t2","title":"Toyota Starlet EP91 Plug-in Wiring Loom - Haltech Elite 550 \/ 750 or Nexus T1 \/ T2","description":"\u003cp\u003e\u003cstrong\u003eImages for reference only!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJDM \/ UK \/ Irish \/ Aus - RHD 4E-FTE\/FE only\u003c\/strong\u003e - other models still possible but are a custom order so get in touch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's a plug-in wiring harness?\u003c\/h3\u003e\n\u003cp\u003eUnlike a patch harness, a plug-in wiring harness is a complete replacement for the engine wiring, see the diagram below for the 98\/99 Glanza V, highlighted in green. This harness seamlessly connects to the engine bay fusebox and interior body connectors (2\/3, depending on your year\/country\/engine). Most factory functions are retained; details on what stays and what doesn't are further explained below. The harness doesn't include a new battery cable, so you'll need to strip this from your existing wiring (check out the video at the bottom of this page for a guide). However, we're considering offering this in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/OPTIMIZE_BACKUP_PRODUCT_Screenshot_2026-02-08_211700.png?v=1771155022\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIs your build ever evolving? This wiring harness allows easy changes to injectors, coils, and additional features as required.\u003c\/h3\u003e\n\u003cp\u003eThis harness uses sub harnesses with Deutsch\/Amphenol DTM\/ATM plugs for injectors, coils and additional features so you can change what you need to when you need to. We also supply the pinouts for these connectors so any competent wiring DIYer can make the changes themselves!\u003c\/p\u003e\n\u003ch3\u003eI don't see any options for fuel\/oil pressure sensors or other features, can these be added?\u003c\/h3\u003e\n\u003cp\u003eYes! We include 2 breakout connectors for this purpose, one in the engine bay and another in the interior. Because everyone's build is different, we decided the best approach would be a modular harness. This means everyone has the same main harness, which keeps costs low, and people can then choose to have whatever extra features they would like. To order custom additions, please get in touch!\u003c\/p\u003e\n\u003ch3\u003eHave questions?\u003c\/h3\u003e\n\u003cp\u003eCall us on \u003ca href=\"tel:+441475325091\"\u003e+44 1475 325 091\u003c\/a\u003e or message us via the \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003econtact page\u003c\/a\u003e, \u003ca href=\"https:\/\/www.instagram.com\/ep_wiring\/\"\u003eInstagram\u003c\/a\u003e or \u003ca href=\"https:\/\/www.facebook.com\/epwiring\"\u003eFacebook.\u003c\/a\u003e We're here to help!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eJDM 4E-FTE\/FE, RHD UK\/Irish\/Aus 4E-FTE\/FE\u003c\/strong\u003e models\u003c\/li\u003e\n\u003cli\u003eManufactured using Tefzel (ETFE) wire - rated up to 150ºC (OEM is rated to 80ºC)\u003c\/li\u003e\n\u003cli\u003eLoom is covered using high temperature fibreglass braid- rated over 600ºC\u003c\/li\u003e\n\u003cli\u003eInjectors and Coils are on sub harasses so these can be changed in the future! \u003c\/li\u003e\n\u003cli\u003eChoice of stock injector, EV14\/USCAR or Bosch EV1 connectors.\u003c\/li\u003e\n\u003cli\u003eChoice of stock coil, K20 COP (coil on plug) or 2ZZ\/Yaris COP.\u003c\/li\u003e\n\u003cli\u003eThe harness is modular so you can customise the additional inputs and outputs! Common options are fuel or oil pressure, flex fuel sensor, clutch switch etc... \u003ca href=\"https:\/\/ep-wiring.com\/contact\/\"\u003eget in touch with your requirements for a quote and to order\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in house using production line tooling by Komax, Mecal, Rennsteig, Knipex, DMC, TE, RaceSpec, Ideal and Sargent. For ultimate reliability no cheap generic tools will be used in the construction of your wiring harness, Toyota didn't so neither will we!\u003c\/li\u003e\n\u003cli\u003eQuality control including crimp height measurement and point to point pin testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specs and Connectors\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for Haltech Elite 550 \/ 750 or Nexus T1 \/ T2 ECU's\u003c\/li\u003e\n\u003cli\u003eTriggering - Stock \u003cstrong\u003e4E-FTE\u003c\/strong\u003e cam sensor (Crank Trigger can be added on as a upgrade - please contact us)\u003c\/li\u003e\n\u003cli\u003eIntake Air Temp Sensor - Bosch 2 wire sensor connector - Sensor not included\u003c\/li\u003e\n\u003cli\u003eCoolant Sensor (ECT) - Bosch 2 wire or OEM Toyota 3 wire - Sensor not included\u003c\/li\u003e\n\u003cli\u003eThrottle Position (TPS) - \u003cstrong\u003eEP Wiring Bosch TPS mount kit included!\u003c\/strong\u003e - Sensor not included\u003c\/li\u003e\n\u003cli\u003eInjectors - Choice of Stock Toyota (aka Denso style), Bosch EV14\/USCAR (ID 1050X, EV14 etc) or Bosch EV1 (Junior Power Timer)\u003c\/li\u003e\n\u003cli\u003eCoils - Choice of Factory 4E-FTE, K20 Coil on Plug or 2ZZ\/Yaris Coil on Plug - Coil packs not included\u003c\/li\u003e\n\u003cli\u003eGround Ring Terminals for Coils, AUX, CAN and ECU\u003c\/li\u003e\n\u003cli\u003eKnock Sensor Wiring for Bosch 0261231006 - Sensor not included\u003c\/li\u003e\n\u003cli\u003eBoost Solenoid (MAC solenoid) - \u003ca href=\"https:\/\/ep-wiring.com\/product\/mac-boost-solenoid\/\"\u003eSolenoid not included - can be ordered from here!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEngine Bay AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and any spare I\/O)\u003c\/li\u003e\n\u003cli\u003eCabin AUX connector (12V+ Power, Ground, 5V+ Sensor Supply, Sensor Ground and any spare I\/O)\u003c\/li\u003e\n\u003cli\u003eCAN Plug next to ECU wired to suit Haltech products such as Haltech WB1, \u003ca href=\"https:\/\/ep-wiring.com\/product-category\/link-ecu\/accessories\/driver-displays\/\"\u003eGauges or Dashes\u003c\/a\u003e etc\u003c\/li\u003e\n\u003cli\u003eOEM Check Engine Light\u003c\/li\u003e\n\u003cli\u003eOEM Tacho signal for stock gauge cluster - Tacho modification by soldering a 1kohm resistor in gauge cluster (\u003ca href=\"https:\/\/www.youtube.com\/watch?v=tOHkLjdutHI\u0026amp;ab_channel=EPWiring\"\u003eCheck our our DIY video\u003c\/a\u003e) or by wiring in something like a \u003ca href=\"https:\/\/www.haltech.com\/product\/ht-038006-tacho-output-adaptor\/\"\u003eHaltech Tacho Output Adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOil pressure light by OEM switch - If using oil pressure sensor on AUX plug you can wire the ECU to the Oil pressure light - ask for this in the order comments\u003c\/li\u003e\n\u003cli\u003eOEM Boost Switch\u003c\/li\u003e\n\u003cli\u003eAlternator wiring\u003c\/li\u003e\n\u003cli\u003eOEM fan switch - 98-99 cars only\u003c\/li\u003e\n\u003cli\u003eBrake fluid level connector\u003c\/li\u003e\n\u003cli\u003eFuel Pump relay trigger from ECU output\u003c\/li\u003e\n\u003cli\u003eSpeed Sensor Signal from Stock Gauge Cluster - If you are using a digital dash this will not work\u003c\/li\u003e\n\u003cli\u003eWindscreen wiper wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot included but required for fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHaltech Elite 550 \/ 750 or Nexus T1 \/ T2 ECU\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eECU mount - To make your life easier we \u003ca href=\"https:\/\/ep-wiring.com\/product\/ep91-ecu-mounting-plate\/\"\u003emade ECU mounting plates\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOEM parts not used:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eABS - Some or all parts of ABS may no longer work. If required it is additional cost\u003c\/li\u003e\n\u003cli\u003eAC Vac solenoids - AC may still work, ask to confirm\u003c\/li\u003e\n\u003cli\u003eStock idle valve\u003c\/li\u003e\n\u003cli\u003eDiagnostics port\u003c\/li\u003e\n\u003cli\u003eBattery power and ground cables - Original ones must be stripped from original wiring or \u003ca href=\"https:\/\/ep-wiring.com\/product\/starlet-glanza-v-1996-1997-alternator-power-wiring\/\"\u003e1996-1997 cars can purchase our replacement wiring here\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo see the install process watch the video of a similar install but with heat shrink covering rather than braid\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=6TxAhOQTZ0o\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EP Wiring","offers":[{"title":"Stock (OEM\/Denso) \/ Stock 4E-FTE Coil","offer_id":51093015920982,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ K20 Coil on Plug","offer_id":51093015953750,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ 2ZZ\/Yaris Coil on Plug","offer_id":51093015986518,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ R35 Skyline Coil on Plug","offer_id":51093016019286,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Stock (OEM\/Denso) \/ Other \/ Decide later","offer_id":51093016084822,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Stock 4E-FTE Coil","offer_id":51093016117590,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ K20 Coil on Plug","offer_id":51093016150358,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ 2ZZ\/Yaris Coil on Plug","offer_id":51093016183126,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ R35 Skyline Coil on Plug","offer_id":51093016215894,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"EV14\/USCAR (Injector Dynamics 1050x) \/ Other \/ Decide later","offer_id":51093016281430,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Stock 4E-FTE Coil","offer_id":51093016314198,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ K20 Coil on Plug","offer_id":51093016346966,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ 2ZZ\/Yaris Coil on Plug","offer_id":51093016379734,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ R35 Skyline Coil on Plug","offer_id":51093016412502,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Bosch EV1 (JPT) \/ Other \/ Decide later","offer_id":51093016478038,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Stock 4E-FTE Coil","offer_id":51093016510806,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ K20 Coil on Plug","offer_id":51093016543574,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ 2ZZ\/Yaris Coil on Plug","offer_id":51093016576342,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ R35 Skyline Coil on Plug","offer_id":51093016609110,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true},{"title":"Other \/ Decide later \/ Other \/ Decide later","offer_id":51093016674646,"sku":null,"price":900.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/7568\/3414\/files\/toyota-starlet-ep91-plug-in-wiring-loom-link-g4x-monsoon-atom-ep-wiring.jpg?v=1745882447"}],"url":"https:\/\/ep-wiring.com\/en-int\/collections\/featured-products\/ep91.oembed","provider":"EP Wiring","version":"1.0","type":"link"}