Description
5-Way Toyota 4E-FTE Ignitor Connector kit for Toyota 4E-FTE engines. This is a Genuine Yazaki connector, the same used by Toyota, not a cheap copy.
- 1X Connector Body – Toyota Part Number 90980-11232
- 4X Terminals: 0.3-0.5 mm² | 22-20 AWG (Part Number: Yazaki 7116-4025)
- 3X Terminals: 0.85-1.25 mm² | 18-16 AWG (Part Number: Yazaki 7116-4026)
- 3X Wire seals: Insulation size: 1.4-1.8 mm (Part Number: Yazaki 7158-3006-90)
- 2X Wire seals: Insulation size: 2-2.2 mm (Part Number: Yazaki 7158-3007-10)
- 1X dummy plug
- Crimp tool recommendation:
- Rennsteig 624 1673 3 012 RT Die Set – Terminal and Seal
- Sargent 3305 MPCT – See Sargent Terminal Repair manual for jaw settings for wire and terminals
- Sargent 3306 MPCT – 1 Jaws for wire seal.
4E-FTE Ignitor (Ignition Module) Pinout Diagram
| Pin | Description |
|---|---|
| 1 | Ignition Feedback – Not required for standalone ECU (IGF) |
| 2 | Ignition Signal from ECU (IGT) – Link ECU Connector A – Pin 13 |
| 3 | Ignition switched 12V+ Power (15amp AM2 fuse) (B+) |
| 4 | High side output to drive tachometer (TACH) |
| 5 | Goes to Ignition Coil – Pin 2 (C-) |
Looking into the front of the connector. (Wires on opposite side)
Reviews
There are no reviews yet